|
Ø 4 m – 6.4 m | Drive TRP
The perfect operator for large revolving doors. |
| |
|
SPESIFICATIONS : |
|
| Functionality |
| • |
New, higher torque operator with integrated overwind safety and emergency brake |
| • |
Power transmission using chains or belts or as an external rotor over rollers |
| • |
Fits into any door construction without problems thanks to its low built-in height of 145mm |
| • |
Service friendly: the control system is mounted separately from the operator (separated by a cable of up to 10m length) |
| • |
The TCP-101 control system automatically registers system-specific data for a constant and secure motion control. |
| • |
Recognition of obstacles and edge safety |
| • |
Connection facility for: |
 |
- |
TORMAX control panel |
|
- |
4 sensors (24VDC) |
|
- |
Safety Devices |
|
- |
Key switch |
|
- |
Lock |
|
- |
Emergency-off switch |
|
- |
Control panel lock |
| • |
Permanent operating diagnosis |
| • |
Various configurable control functions with the service computer |
| • |
Easy software update with Eprom |
|
| Scope of Delivery |
| • |
Operator REVOLVEDOOR Drive TRP |
| • |
TORMAX control panel |
|
- |
with operating modes: NIGHT, REVOLVE, AUTO, EXIT, MANUAL |
|
- |
parameter settings for: normal speed, standby speed, slow speed and time out in operating mode REVOLVE and MANUAL |
|
- |
reset function |
|
- |
fault diagnosis display |
| • |
Control case with control system TCP-101, one I/O module, transformer, main system switch and final position switch |
|
| Options |
| • |
Electromagnetic lock with position monitoring and manual engagement/disengagement inside and outside |
| • |
2 additional I/O modules with freely programmable inputs and outputs |
| • |
Power supply module |
| • |
Chain pulley set incl. chain and chain tensioning facility |
| • |
Service computer |
| • |
Key switch, impulse, presence and safety sensors |
| • |
Sliprings 2A/5 A |
| • |
Battery module |
|
| Standards |
| • |
CE-Conformity |
| • |
Manufactured according to ISO 9001 |
|
Operator
dimensions
(W x Hx L) |
150
x 145 x 541mm |
Torque max.
at
operator shaft
at revolving door shaft |
120 Nm
750 Nm |
Braking torque
max.
at operator shaft
at revolving door shaft |
200 Nm
1300 Nm |
| Mains supply |
115 VAC/60Hz
oder
230VAC/50Hz |
| Power consumption
max. |
380W |
| Temperature
range |
–20
bis +40°C |
Programmable
inputs/outputs |
19/14 |
| |
Central operator assembly
|
